That's because a research team that includes Babak Moaveni, assistant professor of civil and environmental engineering at Tufts University School of Engineering, plans to shake and rumble the structure until it's on the verge of collapsing into a heap of debris and dust.
Moaveni is collaborating with Andreas Stavridis, assistant professor of civil engineering at the University of Texas-Arlington, on a National Science Foundation-funded study to assess how buildings made with reinforced concrete frames and masonry infill walls hold up during an earthquake. The data will also be used to refine existing analytical models and techniques that engineers use when evaluating seismic safety of similarly constructed buildings. The research team also includes engineers from the University of California, at Los Angeles (UCLA).
Thousands of such buildings exist in earthquake-prone places like Los Angeles, San Francisco, the Mediterranean and Latin America, and they are vulnerable to serious damage. "These buildings were built and designed years ago according to building codes that have since become outdated," says Moaveni.
Using an "Eccentric-Mass" Shaker to Rattle a Building
Typically, after an earthquake, owners of a building like the one on West Commercial Avenue would have the structure repaired and maybe retrofitted so that it could endure the next quake. But damage from the 2010 earthquake was so severe that repair was not worth the cost. Owners and the city officials decided to have it demolished.
That’s when Moaveni and Stavridis came forward. In the first phase of the project, the engineers will record the building's existing condition. Then, the team will install a spinning device called an eccentric-mass shaker on the building's roof. This device will induce further damage by simulating the pulsing and vibration of an earthquake rattling the structure from the top down. This has not been done before with an entire structure with that degree of damage. "We are glad that the building owners realized that the building’s misfortune has presented a unique research opportunity for us," Stavridis explains.
The researchers will install cameras at critical locations of the structures to observe damage as the test progresses. At specific intervals, they will also halt the shaker to assess and document structural damage, through visual inspection. Computers will also record data from sensors inside the building. With the initial measurements as a baseline, the researchers will evaluate and quantify progressive damage sustained by the building as it is shaken apart.
Field testing of full-scale structures using mechanical shakers plays an important role in this type of seismic research. In previous experiments, researchers have experimented on wall portions or sections of buildings using low-to-moderate levels of vibrations. "This is a very challenging project but a great research opportunity because we are working with an entire existing building," says Moaveni.
In their project, Moaveni and Stavridis plan to exert large-amplitude forces on the building. "We don't know if we will shake the building until it collapses," Moaveni says. "But, at a minimum, we will shake it until it is on the verge of collapse."About Tufts School of Engineering
Alex Reid | Newswise Science News
Heating and cooling with environmental energy
22.09.2016 | FIZ Karlsruhe – Leibniz-Institut für Informationsinfrastruktur GmbH
Working comfortably in summer heat
02.06.2016 | FIZ Karlsruhe – Leibniz-Institut für Informationsinfrastruktur GmbH
Friction stir welding is a still-young and thus often unfamiliar pressure welding process for joining flat components and semi-finished components made of light metals.
Scientists at the University of Stuttgart have now developed two new process variants that will considerably expand the areas of application for friction stir welding.
Technologie-Lizenz-Büro (TLB) GmbH supports the University of Stuttgart in patenting and marketing its innovations.
Friction stir welding is a still-young and thus often unfamiliar pressure welding process for joining flat components and semi-finished components made of...
Optical quantum computers can revolutionize computer technology. A team of researchers led by scientists from Münster University and KIT now succeeded in putting a quantum optical experimental set-up onto a chip. In doing so, they have met one of the requirements for making it possible to use photonic circuits for optical quantum computers.
Optical quantum computers are what people are pinning their hopes on for tomorrow’s computer technology – whether for tap-proof data encryption, ultrafast...
The Fraunhofer Institute for Organic Electronics, Electron Beam and Plasma Technology FEP has been developing various applications for OLED microdisplays based on organic semiconductors. By integrating the capabilities of an image sensor directly into the microdisplay, eye movements can be recorded by the smart glasses and utilized for guidance and control functions, as one example. The new design will be debuted at Augmented World Expo Europe (AWE) in Berlin at Booth B25, October 18th – 19th.
“Augmented-reality” and “wearables” have become terms we encounter almost daily. Both can make daily life a little simpler and provide valuable assistance for...
With the help of artificial intelligence, chemists from the University of Basel in Switzerland have computed the characteristics of about two million crystals made up of four chemical elements. The researchers were able to identify 90 previously unknown thermodynamically stable crystals that can be regarded as new materials. They report on their findings in the scientific journal Physical Review Letters.
Elpasolite is a glassy, transparent, shiny and soft mineral with a cubic crystal structure. First discovered in El Paso County (Colorado, USA), it can also be...
For the first time, Fraunhofer IKTS shows additively manufactured hardmetal tools at WorldPM 2016 in Hamburg. Mechanical, chemical as well as a high heat resistance and extreme hardness are required from tools that are used in mechanical and automotive engineering or in plastics and building materials industry. Researchers at the Fraunhofer Institute for Ceramic Technologies and Systems IKTS in Dresden managed the production of complex hardmetal tools via 3D printing in a quality that are in no way inferior to conventionally produced high-performance tools.
Fraunhofer IKTS counts decades of proven expertise in the development of hardmetals. To date, reliable cutting, drilling, pressing and stamping tools made of...
28.09.2016 | Event News
27.09.2016 | Event News
23.09.2016 | Event News
28.09.2016 | Medical Engineering
28.09.2016 | Materials Sciences
28.09.2016 | Business and Finance