Forum for Science, Industry and Business

Sponsored by:     3M 
Search our Site:

 

Leuphana “Digital School“ launches in 91 countries

17.01.2013
Students from all over the world design models for life in the city – credit points against degree earned – architect Daniel Libeskind leads pilot course

Leuphana University’s Digital School has entered into the age of collaborative online learning. Less than one week after the start of registration, participants from 91 countries have signed up for its first course “ThinkTank Cities“.

The topic is the future of life in cities, and the course is taught by the renowned architect Daniel Libeskind, who holds a professorship at Leuphana University. Registration is open until January 21, and the program commences on January 23, 2013, finishing three months later in April. There are no preconditions and no tuition fee. A special feature is the awarding of credits. Depending on their home university, these credits may be applied towards the participating students‘ degree program.

The opportunity to address the topic of urbanization in a globally accessible online course is an important step for the proliferation of new ideas and developing concrete frameworks for shaping the megatrend city. Representatives from leading Universities are supporting Leuphana’s project, including Columbia University’s Saskia Sassen from New York. Sassen is internationally considered to be one of the leading experts on the sociology of the city. In addition to Leuphana University’s professors, distinguished academics from all over the world will participate in the teaching team, joining the course from London School of Economics, Goldsmiths University of London, Hebrew University of Jerusalem, ETH and University of Zürich, Collegium Helveticum, Sun Yat-Sen University Guangzhou and Hong Kong’s City University. Also included as teachers and lecturers for the course will be leading experts from politics, media and economics.
The Digital School at the Leuphana University Lüneburg wants to set benchmarks for social learning. “It is the ideal way to democratize academic education“, says Holm Keller, Executive Vice President of Leuphana and responsible for the project. For Keller, the linking of social media such as YouTube or Facebook with traditional correspondence courses leads to a new form of university education. “Online courses modularize the contents of teaching and make them available for anyone, any place and any time – without fixed timetables, money or admission requirements,“ according to Keller. The aim is globally standardized education platforms, which are flexible and can be adapted to the needs of the students while ideally, offering recognized academic degrees. Leuphana Digital School can be found at digital.leuphana.com.

Participants in the Leuphana online course “ThinkTank Cities“ will be working in teams of five. They will solve theoretical and practical assignments and observe accompany the work of the other groups through commentary and evaluation. At the conclusion of the course they will visualize their ideas of the city of the future.
The education platform used by Leuphana for its Digital School is called Candena Scholar and was developed by Candena, a Digital Media startup of the EU Lüneburg Innovation Incubator, which specializes in conceptual design of educational platforms, making them available for global online courses. Partnered with Leuphana University on this project is Fraunhofer-Gesellschaft, the largest organization for applied research in Europe. The course is supported by the campus management systems designer Datenlotsen, Tipp24 SE and the business and career network Xing.

Daniel Libeskind is an international architect and designer. He has designed world-renowned projects including: the Jewish Museum in Berlin, the Denver Art Museum, the Royal Ontario Museum in Toronto, the Military History Museum in Dresden, and the masterplan for Ground Zero among others. Starting in summer 2007, he assumed a vocational professorship at Leuphana University. Through his seminars at the Leuphana University, he designed the new central building in co-operation with students. Construction on the building commenced last year.

The Leuphana University sees itself as a public university for the civil society of the 21st century. Its unique study model, the first of its kind in Germany, has received numerous awards. There are more than 8000 young people studying at Leuphana.

Henning Zuehlsdorff | idw
Further information:
http://digital.leuphana.com/
http://www.leuphana.de/

More articles from Architecture and Construction:

nachricht Heating and cooling with environmental energy
22.09.2016 | FIZ Karlsruhe – Leibniz-Institut für Informationsinfrastruktur GmbH

nachricht Working comfortably in summer heat
02.06.2016 | FIZ Karlsruhe – Leibniz-Institut für Informationsinfrastruktur GmbH

All articles from Architecture and Construction >>>

The most recent press releases about innovation >>>

Die letzten 5 Focus-News des innovations-reports im Überblick:

Im Focus: New welding process joins dissimilar sheets better

Friction stir welding is a still-young and thus often unfamiliar pressure welding process for joining flat components and semi-finished components made of light metals.
Scientists at the University of Stuttgart have now developed two new process variants that will considerably expand the areas of application for friction stir welding.
Technologie-Lizenz-Büro (TLB) GmbH supports the University of Stuttgart in patenting and marketing its innovations.

Friction stir welding is a still-young and thus often unfamiliar pressure welding process for joining flat components and semi-finished components made of...

Im Focus: First quantum photonic circuit with electrically driven light source

Optical quantum computers can revolutionize computer technology. A team of researchers led by scientists from Münster University and KIT now succeeded in putting a quantum optical experimental set-up onto a chip. In doing so, they have met one of the requirements for making it possible to use photonic circuits for optical quantum computers.

Optical quantum computers are what people are pinning their hopes on for tomorrow’s computer technology – whether for tap-proof data encryption, ultrafast...

Im Focus: OLED microdisplays in data glasses for improved human-machine interaction

The Fraunhofer Institute for Organic Electronics, Electron Beam and Plasma Technology FEP has been developing various applications for OLED microdisplays based on organic semiconductors. By integrating the capabilities of an image sensor directly into the microdisplay, eye movements can be recorded by the smart glasses and utilized for guidance and control functions, as one example. The new design will be debuted at Augmented World Expo Europe (AWE) in Berlin at Booth B25, October 18th – 19th.

“Augmented-reality” and “wearables” have become terms we encounter almost daily. Both can make daily life a little simpler and provide valuable assistance for...

Im Focus: Artificial Intelligence Helps in the Discovery of New Materials

With the help of artificial intelligence, chemists from the University of Basel in Switzerland have computed the characteristics of about two million crystals made up of four chemical elements. The researchers were able to identify 90 previously unknown thermodynamically stable crystals that can be regarded as new materials. They report on their findings in the scientific journal Physical Review Letters.

Elpasolite is a glassy, transparent, shiny and soft mineral with a cubic crystal structure. First discovered in El Paso County (Colorado, USA), it can also be...

Im Focus: Complex hardmetal tools out of the 3D printer

For the first time, Fraunhofer IKTS shows additively manufactured hardmetal tools at WorldPM 2016 in Hamburg. Mechanical, chemical as well as a high heat resistance and extreme hardness are required from tools that are used in mechanical and automotive engineering or in plastics and building materials industry. Researchers at the Fraunhofer Institute for Ceramic Technologies and Systems IKTS in Dresden managed the production of complex hardmetal tools via 3D printing in a quality that are in no way inferior to conventionally produced high-performance tools.

Fraunhofer IKTS counts decades of proven expertise in the development of hardmetals. To date, reliable cutting, drilling, pressing and stamping tools made of...

All Focus news of the innovation-report >>>

Anzeige

Anzeige

Event News

European Health Forum Gastein 2016 kicks off today

28.09.2016 | Event News

Laser use for neurosurgery and biofabrication - LaserForum 2016 focuses on medical technology

27.09.2016 | Event News

Experts from industry and academia discuss the future mobile telecommunications standard 5G

23.09.2016 | Event News

 
Latest News

The first genome of a coral reef fish

29.09.2016 | Life Sciences

Gentle sensors for diagnosing brain disorders

29.09.2016 | Medical Engineering

Swiss space research reaches for the sky

29.09.2016 | Physics and Astronomy

VideoLinks
B2B-VideoLinks
More VideoLinks >>>