In a study recently published in Field Crops Research, Williams questioned whether the crop yield responses that have been previously reported in sweet corn research are actually helpful to the industry.
"What has been done in the past is analogous to predicting someone's height based on their shoe size, as opposed to actually measuring their height," Williams said.
After collecting and studying sweet corn data representing 31 hybrids across 22 locations in Illinois over an 8-year period, Williams said he sees a disconnect in what researchers are measuring in the field and what processors and seed companies need to know in order to make improved production decisions.
In other words, Williams said researchers need to start speaking the same language as the sweet corn industry.
Williams explained that the two variables that affect processor decisions most include recovery (percentage of kernels that can be canned or bagged from the green-ear mass) and case production (cases per acre of processed kernels).
However, he added that nearly all historic and recent field research in processing sweet corn reports neither of these variables, regardless of whether the studies pertained to plant pathology, fertility management, pest control, or sweet corn breeding and genetics.
"Ear number or green-ear mass are often the only crop responses reported in research on field productivity of processing sweet corn. Sometimes, other crop responses are reported, including plant traits such as height or canopy density, or ear traits such as ear length or ear width," he said.
In his study, Williams looked for relationships between processor variables and 17 crop traits (5 plant traits, 8 ear traits, and 4 yield traits). He determined that none of the crop traits predicted recovery.
"Recovery is something that has to be measured directly. Currently, there's no way to predict it," he explained.
When comparing the variability of the estimates in case production based on traits such as green-ear mass, husked-ear mass, and ear number, he determined that fresh kernel mass also was a far superior predictor of case production.
"Essentially, the more a measured yield response physically resembled a case of sweet corn, the more precise and accurate the estimate of case production," he reported.
The challenge in getting the necessary data is the costs associated with the equipment and labor, according to Williams.
In order to collect information on fresh kernel mass, Williams and his team designed and built a portable, "mini-processing plant" that they use in the field at harvest to husk ears and cut fresh kernels.
"At the moment there isn't a viable alternative that's less expensive," he said. "Does the research community continue to report mediocre data, or do we invest in an approach that gives the sweet corn industry exactly what it needs to make use of our research?"
Another obstacle is the narrow window of time when sweet corn is harvested, usually by hand, for research. Though field corn for grain production is harvested at physiological maturity, sweet corn is harvested at the R3 stage (milk stage), while kernel moisture is at approximately 72 to 76 percent. "When sweet corn is ripe, waiting is not an option," Williams explained.
A change in the way sweet corn research is done will have an impact on how processors, growers, and seed companies make decisions in the future, according to the researcher.
"Applied research aimed at improving crop productivity is predicated on the ability to accurately measure important crop responses, such as yield. For processing sweet corn, the most important responses include recovery and case production," he said. "Those of us in the research community can't expect the sweet corn industry to adopt our research-based findings when we're failing to measure what's truly important."
"Few crop traits accurately predict variables important to productivity of processing sweet corn," is published in the February 2014 issue of Field Crops Research and can be accessed online at http://www.sciencedirect.com/science/article/pii/S0378429013004073.
Martin Williams | EurekAlert!
Farming with forests
23.09.2016 | University of Illinois College of Agricultural, Consumer and Environmental Sciences (ACES)
Ecological intensification of agriculture
09.09.2016 | Julius-Maximilians-Universität Würzburg
Optical quantum computers can revolutionize computer technology. A team of researchers led by scientists from Münster University and KIT now succeeded in putting a quantum optical experimental set-up onto a chip. In doing so, they have met one of the requirements for making it possible to use photonic circuits for optical quantum computers.
Optical quantum computers are what people are pinning their hopes on for tomorrow’s computer technology – whether for tap-proof data encryption, ultrafast...
The Fraunhofer Institute for Organic Electronics, Electron Beam and Plasma Technology FEP has been developing various applications for OLED microdisplays based on organic semiconductors. By integrating the capabilities of an image sensor directly into the microdisplay, eye movements can be recorded by the smart glasses and utilized for guidance and control functions, as one example. The new design will be debuted at Augmented World Expo Europe (AWE) in Berlin at Booth B25, October 18th – 19th.
“Augmented-reality” and “wearables” have become terms we encounter almost daily. Both can make daily life a little simpler and provide valuable assistance for...
With the help of artificial intelligence, chemists from the University of Basel in Switzerland have computed the characteristics of about two million crystals made up of four chemical elements. The researchers were able to identify 90 previously unknown thermodynamically stable crystals that can be regarded as new materials. They report on their findings in the scientific journal Physical Review Letters.
Elpasolite is a glassy, transparent, shiny and soft mineral with a cubic crystal structure. First discovered in El Paso County (Colorado, USA), it can also be...
For the first time, Fraunhofer IKTS shows additively manufactured hardmetal tools at WorldPM 2016 in Hamburg. Mechanical, chemical as well as a high heat resistance and extreme hardness are required from tools that are used in mechanical and automotive engineering or in plastics and building materials industry. Researchers at the Fraunhofer Institute for Ceramic Technologies and Systems IKTS in Dresden managed the production of complex hardmetal tools via 3D printing in a quality that are in no way inferior to conventionally produced high-performance tools.
Fraunhofer IKTS counts decades of proven expertise in the development of hardmetals. To date, reliable cutting, drilling, pressing and stamping tools made of...
At AKL’16, the International Laser Technology Congress held in May this year, interest in the topic of process control was greater than expected. Appropriately, the event was also used to launch the Industry Working Group for Process Control in Laser Material Processing. The group provides a forum for representatives from industry and research to initiate pre-competitive projects and discuss issues such as standards, potential cost savings and feasibility.
In the age of industry 4.0, laser technology is firmly established within manufacturing. A wide variety of laser techniques – from USP ablation and additive...
27.09.2016 | Event News
23.09.2016 | Event News
20.09.2016 | Event News
27.09.2016 | Life Sciences
27.09.2016 | Physics and Astronomy
27.09.2016 | Life Sciences