Wonsuk “Daniel” Lee’s study, published in the January issue of the journal Biosystems Engineering, could eventually help Florida’s $9 billion-a-year citrus industry.
Lee, a UF agricultural and biological engineering professor, used an algorithm to find immature citrus in photos taken under different light conditions and fruit that was hidden by leaves and branches. He and his colleagues found 80 percent of the immature fruit.
The accuracy rate means growers can use the model to know well before harvest how much fruit is on their trees, Lee said. Therefore, they can more easily plan harvesting, predict crop yields and possibly make more money, he said.
Harvesting accounts for about 30 percent of the cost of citrus production, Lee said. With Lee’s system, growers can determine the optimal time to harvest much earlier, he said.
Traditionally, growers have estimated crop yields on the number of boxes they believe their mature citrus trees can produce, based on years of experience examining their groves, Lee said. The U.S. Department of Agriculture also publishes a monthly crop yield estimate, based on examining tree sizes at select locations around the state and then gauging the number of fruit each branch is expected to yield.
“This gives growers a more accurate rate than just guessing,” Lee said, although he noted that his method isn’t yet ready to be used to estimate yield for an entire grove. But when that day comes, he said, growers will benefit: “If you know the exact yield, you can predict the price.”
Traditionally, growers manage groves in units of varying acres. Growers harvest more citrus in some parts of their groves than others possibly because of differences in soil from one acre to another, water or disease, Lee said.
The study, co-authored by UF computer and information sciences doctoral student Subhajit Sengupta, details the yield-estimation method, which may also someday help growers identify the least productive parts of their groves so they can find out why.
“You have to find the cause of those and correct those so you can increase yield and profit, eventually,” he said.
Using a digital camera, two of Lee’s former students took 240 photos of fruit from a research grove at UF’s Institute of Food and Agricultural Sciences on the Gainesville campus. Because of the scope of the study, these are preliminary findings, Lee said, but they hold promise for growers seeking to boost the accuracy of their crop-yield estimates.
The findings are part of Lee’s research goal of developing an electronic system that can “see” and count fruit, a concept called machine vision.
The system includes a digital camera, a portable computer, GPS receiver and software designed by Lee and his graduate students. Ultimately, growers would like a machine that drives itself through groves, but researchers aren’t there yet, Lee said.
In smaller groves, it’s possible to photograph every tree, Lee said. But for those that span thousands of acres, operators would photograph trees in representative parts of the grove and use the results to make projections.
For now, Lee said, he and one of his graduate students are working on developing the self-running machine vision system that growers want.Source: Wonsuk “Daniel” Lee, 352-392-1864, ext. 227, firstname.lastname@example.org
Brad Buck | Newswise
Farming with forests
23.09.2016 | University of Illinois College of Agricultural, Consumer and Environmental Sciences (ACES)
Ecological intensification of agriculture
09.09.2016 | Julius-Maximilians-Universität Würzburg
The Fraunhofer Institute for Organic Electronics, Electron Beam and Plasma Technology FEP has been developing various applications for OLED microdisplays based on organic semiconductors. By integrating the capabilities of an image sensor directly into the microdisplay, eye movements can be recorded by the smart glasses and utilized for guidance and control functions, as one example. The new design will be debuted at Augmented World Expo Europe (AWE) in Berlin at Booth B25, October 18th – 19th.
“Augmented-reality” and “wearables” have become terms we encounter almost daily. Both can make daily life a little simpler and provide valuable assistance for...
With the help of artificial intelligence, chemists from the University of Basel in Switzerland have computed the characteristics of about two million crystals made up of four chemical elements. The researchers were able to identify 90 previously unknown thermodynamically stable crystals that can be regarded as new materials. They report on their findings in the scientific journal Physical Review Letters.
Elpasolite is a glassy, transparent, shiny and soft mineral with a cubic crystal structure. First discovered in El Paso County (Colorado, USA), it can also be...
For the first time, Fraunhofer IKTS shows additively manufactured hardmetal tools at WorldPM 2016 in Hamburg. Mechanical, chemical as well as a high heat resistance and extreme hardness are required from tools that are used in mechanical and automotive engineering or in plastics and building materials industry. Researchers at the Fraunhofer Institute for Ceramic Technologies and Systems IKTS in Dresden managed the production of complex hardmetal tools via 3D printing in a quality that are in no way inferior to conventionally produced high-performance tools.
Fraunhofer IKTS counts decades of proven expertise in the development of hardmetals. To date, reliable cutting, drilling, pressing and stamping tools made of...
At AKL’16, the International Laser Technology Congress held in May this year, interest in the topic of process control was greater than expected. Appropriately, the event was also used to launch the Industry Working Group for Process Control in Laser Material Processing. The group provides a forum for representatives from industry and research to initiate pre-competitive projects and discuss issues such as standards, potential cost savings and feasibility.
In the age of industry 4.0, laser technology is firmly established within manufacturing. A wide variety of laser techniques – from USP ablation and additive...
Every three years, the plastics industry gathers at K, the international trade fair for plastics and rubber in Düsseldorf. The Fraunhofer Institute for Laser Technology ILT will also be attending again and presenting many innovative technologies, such as for joining plastics and metals using ultrashort pulse lasers. From October 19 to 26, you can find the Fraunhofer ILT at the joint Fraunhofer booth SC01 in Hall 7.
K is the world’s largest trade fair for the plastics and rubber industry. As in previous years, the organizers are expecting 3,000 exhibitors and more than...
23.09.2016 | Event News
20.09.2016 | Event News
16.09.2016 | Event News
26.09.2016 | Materials Sciences
26.09.2016 | Materials Sciences
26.09.2016 | Materials Sciences