The Asian citrus psyllid (ACP) can spread the lethal and incurable citrus disease known as huanglongbing (HLB) or citrus greening that threatens the multi-billion dollar global citrus industry. In Southern California, large and widespread populations of ACP have been detected in several counties, having arrived, most likely, from Mexico where ACP is widely established.
This is a female Tamarixia radiata, highly magnified. The tiny parasitic wasp lays eggs in Asian citrus psyllid nymphs, eventually killing them.
Credit: Jason Mottern, UC Riverside
This photo shows an Asian citrus psyllid nymph.
Credit: Mike Lewis, CISR, UC Riverside.
In 2011, for the first time entomologists at the University of California, Riverside released Tamarixia radiata, a wasp that is the natural enemy of the ACP, in a citrus grove in Riverside to help control the psyllid. But is this wasp safe to use? Does its introduction pose any risk to the environment?
Results from Federally mandated tests performed at the University of California, Riverside now show that Tamarixia radiata is indeed safe for the environment and poses no undue risk to other insects, humans or pets.
"Our work demonstrates that Tamarixia radiata is very specific to the target it is being released to kill — the nymphs of the Asian citrus psyllid in this case," said Mark Hoddle, the director of the Center for Invasive Species Research, whose lab performed the tests.
Study results appear in the February 2014 issue of the Journal of Economic Entomology.
Safety testing in biological control is important as the release of natural enemies may pose some type of environmental risk. In this instance, Tamarixia radiata were imported from the Punjab region of Pakistan, and tested for safety in quarantine at UCR over an 18 month period.
To test the safety of Tamarixia, different species of native California psyllids were exposed to the wasp in a series of tests. The tests were designed to give the wasp a "choice" between ACP and a non-target psyllid speices, or there was "no choice" (that is, the wasp was only given access to a non-target species, one it had not evolved with). When given a choice, Tamarixia overwhelming attacked ACP, the researchers found.
"In only one instance was a non-target species attacked at very low rates — less than 5 percent," Hoddle said. "This was the native pest potato psyllid, which spreads a bacterium that causes zebra chip disease. Such low attack rates are unlikely to cause population declines of this pest."
According to Hoddle, such results demonstrate that carefully selected natural enemies used in biological control programs for invasive pests can be very safe and should not cause unwanted environmental damage.
"There is growing concern over the damage that invasive species cause," he said, "and biological control programs don't want to be causing additional problems through releasing inappropriate agents for the control of invasive pests. Safety tests like those conducted in this study greatly minimize these risks."
Hoddle noted that the tests were difficult to conduct in quarantine.
"Native psyllids are hard to find and the native plants they grow on are difficult to culture in the laboratory," he said. "It was very rewarding to have completed these demanding studies over an 18 month period and to discover that the Pakistani wasp will be a good natural enemy to use in California for the biological control of ACP."
In 2011, the U.S. Department of Agriculture reviewed and approved the 60-page Environment Assessment Report, the foundational work that the research paper is based on, and approved release of Tamarixia from quarantine. The data presented in the report is essentially the same as the published paper except that this time it was reviewed by additional scientists.
"We have now released more than 200,000 Tamarixia radiata in Southern California at more than 350 different sites, mainly in urban areas and spanning six counties — Imperial, Los Angeles, Orange, Riverside, San Bernardino, and San Diego," Hoddle said. "They have established and are spreading, tracking down ACP on citrus in people's gardens and orchards."
The Tamarixia larvae will eat the ACP nymphs, killing them, and emerge as adults about 12 days later. Adult female Tamarixia also eat other ACP nymphs, killing many in the process.
Hoddle was joined in the study by Raju Pandey, a former postdoctoral researcher in his lab and working now with the Citrus Research Board.
The research was supported by a California Department of Food and Agriculture Specialty Crops Grant and a Citrus Research Board grant.
The University of California, Riverside is a doctoral research university, a living laboratory for groundbreaking exploration of issues critical to Inland Southern California, the state and communities around the world. Reflecting California's diverse culture, UCR's enrollment has exceeded 21,000 students. The campus opened a medical school in 2013 and has reached the heart of the Coachella Valley by way of the UCR Palm Desert Center. The campus has an annual statewide economic impact of more than $1 billion. A broadcast studio with fiber cable to the AT&T Hollywood hub is available for live or taped interviews. UCR also has ISDN for radio interviews. To learn more, call (951) UCR-NEWS.
Iqbal Pittalwala | EurekAlert!
Farming with forests
23.09.2016 | University of Illinois College of Agricultural, Consumer and Environmental Sciences (ACES)
Ecological intensification of agriculture
09.09.2016 | Julius-Maximilians-Universität Würzburg
Friction stir welding is a still-young and thus often unfamiliar pressure welding process for joining flat components and semi-finished components made of light metals.
Scientists at the University of Stuttgart have now developed two new process variants that will considerably expand the areas of application for friction stir welding.
Technologie-Lizenz-Büro (TLB) GmbH supports the University of Stuttgart in patenting and marketing its innovations.
Friction stir welding is a still-young and thus often unfamiliar pressure welding process for joining flat components and semi-finished components made of...
Optical quantum computers can revolutionize computer technology. A team of researchers led by scientists from Münster University and KIT now succeeded in putting a quantum optical experimental set-up onto a chip. In doing so, they have met one of the requirements for making it possible to use photonic circuits for optical quantum computers.
Optical quantum computers are what people are pinning their hopes on for tomorrow’s computer technology – whether for tap-proof data encryption, ultrafast...
The Fraunhofer Institute for Organic Electronics, Electron Beam and Plasma Technology FEP has been developing various applications for OLED microdisplays based on organic semiconductors. By integrating the capabilities of an image sensor directly into the microdisplay, eye movements can be recorded by the smart glasses and utilized for guidance and control functions, as one example. The new design will be debuted at Augmented World Expo Europe (AWE) in Berlin at Booth B25, October 18th – 19th.
“Augmented-reality” and “wearables” have become terms we encounter almost daily. Both can make daily life a little simpler and provide valuable assistance for...
With the help of artificial intelligence, chemists from the University of Basel in Switzerland have computed the characteristics of about two million crystals made up of four chemical elements. The researchers were able to identify 90 previously unknown thermodynamically stable crystals that can be regarded as new materials. They report on their findings in the scientific journal Physical Review Letters.
Elpasolite is a glassy, transparent, shiny and soft mineral with a cubic crystal structure. First discovered in El Paso County (Colorado, USA), it can also be...
For the first time, Fraunhofer IKTS shows additively manufactured hardmetal tools at WorldPM 2016 in Hamburg. Mechanical, chemical as well as a high heat resistance and extreme hardness are required from tools that are used in mechanical and automotive engineering or in plastics and building materials industry. Researchers at the Fraunhofer Institute for Ceramic Technologies and Systems IKTS in Dresden managed the production of complex hardmetal tools via 3D printing in a quality that are in no way inferior to conventionally produced high-performance tools.
Fraunhofer IKTS counts decades of proven expertise in the development of hardmetals. To date, reliable cutting, drilling, pressing and stamping tools made of...
28.09.2016 | Event News
27.09.2016 | Event News
23.09.2016 | Event News
28.09.2016 | Medical Engineering
28.09.2016 | Materials Sciences
28.09.2016 | Business and Finance