Forum for Science, Industry and Business

Sponsored by:     3M 
Search our Site:

 

Researchers unlock ancient Maya secrets with modern soil science

12.11.2012
After emerging sometime before 1000 BC, the Maya rose to become the most advanced Pre-Columbian society in the Americas, thriving in jungle cities of tens of thousands of people, such as the one in Guatemala's Tikal National Park. But after reaching its peak between 250 and 900 AD, the Maya civilization began to wane and exactly why has been an enduring mystery to scientists.

Writing in the Nov.-Dec. issue of the Soil Science of America Journal (SSSA-J), an interdisciplinary team led by Richard Terry, a Brigham Young University soil scientist, now describes its analysis of maize agriculture in the soils of Tikal. Not surprisingly, the study uncovered evidence for major maize production in lowland areas, where erosion is less likely and agriculture was presumably more sustainable for this community of an estimated 60,000 people.

But the team also discovered evidence of erosion in upslope soils, suggesting that farming did spread to steeper, less suitable soils over time. And if Maya agriculture did cause substantial erosion, the soil loss could eventually have undercut the Maya's ability to grow food, say the researchers.

The findings are just the latest example of how invisible artifacts in soil—something archeologists literally used to brush aside—can inform studies of past civilizations. That's because artwork and buildings can crumble over time and jungles will eventually conceal ancient farm fields, but "the soil chemistry is still there," Terry says.

He explains, for example, that most forest vegetation native to Tikal uses a photosynthetic pathway called C3, while maize uses a pathway called C4. The soil organic matter derived from these two pathways also differs, allowing researchers to make conclusions about the types of plants that were growing in the soils they test.

Thus, by analyzing soils in different areas of Tikal as well as looking at the layers that had formed in the soils, Terry and his collaborators were able to map the areas where ancient maize production occurred, including lowland "bajo" areas and possibly steeper slopes, as more food was needed.

Questions like this about past farming practices have always interested archeologists, Terry notes. But the tools of modern soil science are now enabling these scientists to ask increasingly sophisticated questions about how ancient peoples tried to sustain themselves—and whether their treatment of the land was a factor in cases where they failed.

"[These tools] open us up to thinking about the world in ways that we haven't before," Terry says. "We have changed the paradigm amongst the archaeologists."

The research appearing in SSSA-J was funded by grants from the National Science Foundation and Brigham Young University.

Read more in the latest issue of Soil Horizons, a publication of the Soil Science Society of America.

The full article is available for no charge for 30 days following the date of this summary. View the abstract at https://www.soils.org/publications/sssaj/abstracts/0/0/sssaj2010.0224.

Madeline Fisher | EurekAlert!
Further information:
http://www.sciencesocieties.org

More articles from Agricultural and Forestry Science:

nachricht Farming with forests
23.09.2016 | University of Illinois College of Agricultural, Consumer and Environmental Sciences (ACES)

nachricht Ecological intensification of agriculture
09.09.2016 | Julius-Maximilians-Universität Würzburg

All articles from Agricultural and Forestry Science >>>

The most recent press releases about innovation >>>

Die letzten 5 Focus-News des innovations-reports im Überblick:

Im Focus: OLED microdisplays in data glasses for improved human-machine interaction

The Fraunhofer Institute for Organic Electronics, Electron Beam and Plasma Technology FEP has been developing various applications for OLED microdisplays based on organic semiconductors. By integrating the capabilities of an image sensor directly into the microdisplay, eye movements can be recorded by the smart glasses and utilized for guidance and control functions, as one example. The new design will be debuted at Augmented World Expo Europe (AWE) in Berlin at Booth B25, October 18th – 19th.

“Augmented-reality” and “wearables” have become terms we encounter almost daily. Both can make daily life a little simpler and provide valuable assistance for...

Im Focus: Artificial Intelligence Helps in the Discovery of New Materials

With the help of artificial intelligence, chemists from the University of Basel in Switzerland have computed the characteristics of about two million crystals made up of four chemical elements. The researchers were able to identify 90 previously unknown thermodynamically stable crystals that can be regarded as new materials. They report on their findings in the scientific journal Physical Review Letters.

Elpasolite is a glassy, transparent, shiny and soft mineral with a cubic crystal structure. First discovered in El Paso County (Colorado, USA), it can also be...

Im Focus: Complex hardmetal tools out of the 3D printer

For the first time, Fraunhofer IKTS shows additively manufactured hardmetal tools at WorldPM 2016 in Hamburg. Mechanical, chemical as well as a high heat resistance and extreme hardness are required from tools that are used in mechanical and automotive engineering or in plastics and building materials industry. Researchers at the Fraunhofer Institute for Ceramic Technologies and Systems IKTS in Dresden managed the production of complex hardmetal tools via 3D printing in a quality that are in no way inferior to conventionally produced high-performance tools.

Fraunhofer IKTS counts decades of proven expertise in the development of hardmetals. To date, reliable cutting, drilling, pressing and stamping tools made of...

Im Focus: Launch of New Industry Working Group for Process Control in Laser Material Processing

At AKL’16, the International Laser Technology Congress held in May this year, interest in the topic of process control was greater than expected. Appropriately, the event was also used to launch the Industry Working Group for Process Control in Laser Material Processing. The group provides a forum for representatives from industry and research to initiate pre-competitive projects and discuss issues such as standards, potential cost savings and feasibility.

In the age of industry 4.0, laser technology is firmly established within manufacturing. A wide variety of laser techniques – from USP ablation and additive...

Im Focus: New laser joining technologies at ‘K 2016’ trade fair

Every three years, the plastics industry gathers at K, the international trade fair for plastics and rubber in Düsseldorf. The Fraunhofer Institute for Laser Technology ILT will also be attending again and presenting many innovative technologies, such as for joining plastics and metals using ultrashort pulse lasers. From October 19 to 26, you can find the Fraunhofer ILT at the joint Fraunhofer booth SC01 in Hall 7.

K is the world’s largest trade fair for the plastics and rubber industry. As in previous years, the organizers are expecting 3,000 exhibitors and more than...

All Focus news of the innovation-report >>>

Anzeige

Anzeige

Event News

Experts from industry and academia discuss the future mobile telecommunications standard 5G

23.09.2016 | Event News

ICPE in Graz for the seventh time

20.09.2016 | Event News

Using mathematical models to understand our brain

16.09.2016 | Event News

 
Latest News

How to merge two black holes in a simple way

26.09.2016 | Physics and Astronomy

Australian technology installed on world’s largest single-dish radio telescope

26.09.2016 | Physics and Astronomy

New mechanisms uncovered explaining frost tolerance in plants

26.09.2016 | Life Sciences

VideoLinks
B2B-VideoLinks
More VideoLinks >>>