Forum for Science, Industry and Business

Sponsored by:     3M 
Search our Site:

 

Causes of rubber tree bark necrosis identified

15.04.2005


The rubber tree, Hevea brasiliensis, is cultivated in many humid tropical countries for the latex it produces, from which is extracted natural rubber mainly used by the tyre industry. Asia alone provides almost 95 % of the world production, where the first producer is Thailand whose rubber industry earns a regular income for 10 % of the population. However, a disease is attacking rubber trees that causes irreversible drying-up of latex flow, and can affect up to 30% of trees in African, Asian and American plantations, causing marked falls in production and substantial economic losses. Termed “rubber tree bark necrosis syndrome” (RTBN), it was diagnosed in 1983 (4) in an industrial-scale plantation estate (Michelin company, Ivory Coast) by IRD researchers. The first investigations, conducted at the request of the plantation company, could not establish a link between RTBN and any pathogenic agent (fungus, virus, bacterium or mycoplasm).



Further research projects were launched at the end of 1999 by the IRD team and its partners (2) at the request of the rubber production sector and with its support (1). This complex syndrome was then tackled using a multidisciplinary approach (involving plant pathology, agricultural soil science, cell and molecular physiology, virology, and so on) and focusing on several different localities (3), which provided conditions for identifying its origin and activating mechanism.

Since the 1970s, the predominant basis of rubber cultivation has been propagation by grafting on tree stock. In 90% of cases, RTBN attacks the tree vascular tissues, starting right at the grafting point situated in the transition zone between the trunk and the roots, the collar. The first stage of the disease is not detectable because the first cells to undergo necrosis are located in internal tissues of the bark. The necrosis, however, extends steadily to the whole base of the trunk before travelling upwards, up to the tapping notch. At this stage, the notch no longer produces latex and the affected trees are then noticeable. When the outer bark becomes diseased, cracks begin to appear starting from it and then dead parts flake off.


Previous results prompted a search for pathogenic agents focused on viruses or viroid organisms that could be transmitted by the tapping knife. This line proved unfruitful. Any major influence of soil chemistry characteristics was also excluded. The research team subsequently favoured a hypothesis envisaging a multi-factor physiological cause. Investigations into the influence of the physical constraints of the soil then began. Evidence appeared of a clear correlation between the risks of the emergence of the disease and the strong mechanical resistance of soils which holds up water transport and absorption by the tree roots. This accentuated resistance, which can be the result of low porosity or induration of these soils, appeared here to be more specifically linked to ground compaction by bulldozers. The non-random distribution of diseased trees is consistent with the areas where bulldozer use has been most intense. Physiological observations showed moreover that the rubber trees hit by necrosis have poorer than normal root development. This anomaly, whether a result of poor stock/graft interaction or of genetic predisposition of the stock tree, causes supply of water and mineral salts to the tree to be low. This tendency is accentuated by complications that grafting engenders in the tree’s circulation vessels, particularly in the junction between the different sap-conducting vessels of the graft-carrier and graft. Eco-physiological analyses revealed that the RTBN-affected trees are in a state of water deficit. This is aggravated in times of drought (a climatic factor) or when trees are overexploited for tapping (human factor).

The combination of these different stresses induces necrosis (cell-death) in the collar of the tree, involving the disintegration of cell compartments, and a resulting release of large amounts of cyanide which the rubber tree tissues naturally contain. The effect of this poison, accumulating owing to the impaired metabolism, is to activate the necrosis. Water that rises towards the notch, drawn up by tapping, facilitates the upward diffusion of the cyanide and hence the spread of necrosis towards the upper trunk. The resulting deep disintegration of the trunk phloem and bark tissues explains the irreversible blockage of latex production.

Rubber tree bark necrosis –its appearance and development- therefore results from the accumulation of climatic and human-induced stresses and physiological malfunctions in the grafted trees. This multifactor approach has provided the first overall view of how the disease generates. However, grey areas remain to be explored. A genetic approach is now being applied, with the aim of finding early indicators of the disease that can make field detection as reliable as possible. The results acquired have provided the bases for recommendations on practical measures to take. These are already being applied and are an important new tool in plantation management.

Fabienne Doumenge (Montpellier) - DIC

(1) Institut français du caoutchouc (Paris), Michelin (Clermont-Ferrand), International Rubber Plantation Society (Paris), Socfinco (Brussels), in the context of a research agreement concluded with the IRD n°2454 (1999-2004).

(2) Abobo-Adjamé University (Ivory Coast), Instituto Valenciano de Investigaciones Agrarias (Spain), INRA (Avignon, Bordeaux), Cirad (Montpellier), Poincaré University (Nancy), Mahidol University (Thailand).

(3) Brazil, Cambodia, Cameroon, China, India, Indonesia, Ghana, Liberia, Malaysia, Nigeria, Republic of the Ivory Coast, Thailand.

4) NANDRIS D., CHRESTIN H., GEIGER J.P., NICOLE M. et THOUVENEL J.C., 1984. Occurrence of a phloem necrosis on the trunk of rubber tree. 75th Annual Conference of Rubber Research, Sri Lanka, September 1984, Colombo, in Proceedings p. 59.

Marie Guillaume | alfa
Further information:
http://www.ird.fr/

More articles from Agricultural and Forestry Science:

nachricht Farming with forests
23.09.2016 | University of Illinois College of Agricultural, Consumer and Environmental Sciences (ACES)

nachricht Ecological intensification of agriculture
09.09.2016 | Julius-Maximilians-Universität Würzburg

All articles from Agricultural and Forestry Science >>>

The most recent press releases about innovation >>>

Die letzten 5 Focus-News des innovations-reports im Überblick:

Im Focus: OLED microdisplays in data glasses for improved human-machine interaction

The Fraunhofer Institute for Organic Electronics, Electron Beam and Plasma Technology FEP has been developing various applications for OLED microdisplays based on organic semiconductors. By integrating the capabilities of an image sensor directly into the microdisplay, eye movements can be recorded by the smart glasses and utilized for guidance and control functions, as one example. The new design will be debuted at Augmented World Expo Europe (AWE) in Berlin at Booth B25, October 18th – 19th.

“Augmented-reality” and “wearables” have become terms we encounter almost daily. Both can make daily life a little simpler and provide valuable assistance for...

Im Focus: Artificial Intelligence Helps in the Discovery of New Materials

With the help of artificial intelligence, chemists from the University of Basel in Switzerland have computed the characteristics of about two million crystals made up of four chemical elements. The researchers were able to identify 90 previously unknown thermodynamically stable crystals that can be regarded as new materials. They report on their findings in the scientific journal Physical Review Letters.

Elpasolite is a glassy, transparent, shiny and soft mineral with a cubic crystal structure. First discovered in El Paso County (Colorado, USA), it can also be...

Im Focus: Complex hardmetal tools out of the 3D printer

For the first time, Fraunhofer IKTS shows additively manufactured hardmetal tools at WorldPM 2016 in Hamburg. Mechanical, chemical as well as a high heat resistance and extreme hardness are required from tools that are used in mechanical and automotive engineering or in plastics and building materials industry. Researchers at the Fraunhofer Institute for Ceramic Technologies and Systems IKTS in Dresden managed the production of complex hardmetal tools via 3D printing in a quality that are in no way inferior to conventionally produced high-performance tools.

Fraunhofer IKTS counts decades of proven expertise in the development of hardmetals. To date, reliable cutting, drilling, pressing and stamping tools made of...

Im Focus: Launch of New Industry Working Group for Process Control in Laser Material Processing

At AKL’16, the International Laser Technology Congress held in May this year, interest in the topic of process control was greater than expected. Appropriately, the event was also used to launch the Industry Working Group for Process Control in Laser Material Processing. The group provides a forum for representatives from industry and research to initiate pre-competitive projects and discuss issues such as standards, potential cost savings and feasibility.

In the age of industry 4.0, laser technology is firmly established within manufacturing. A wide variety of laser techniques – from USP ablation and additive...

Im Focus: New laser joining technologies at ‘K 2016’ trade fair

Every three years, the plastics industry gathers at K, the international trade fair for plastics and rubber in Düsseldorf. The Fraunhofer Institute for Laser Technology ILT will also be attending again and presenting many innovative technologies, such as for joining plastics and metals using ultrashort pulse lasers. From October 19 to 26, you can find the Fraunhofer ILT at the joint Fraunhofer booth SC01 in Hall 7.

K is the world’s largest trade fair for the plastics and rubber industry. As in previous years, the organizers are expecting 3,000 exhibitors and more than...

All Focus news of the innovation-report >>>

Anzeige

Anzeige

Event News

Experts from industry and academia discuss the future mobile telecommunications standard 5G

23.09.2016 | Event News

ICPE in Graz for the seventh time

20.09.2016 | Event News

Using mathematical models to understand our brain

16.09.2016 | Event News

 
Latest News

Stronger turbine blades with molybdenum silicides

26.09.2016 | Materials Sciences

Scientists Find Twisting 3-D Raceway for Electrons in Nanoscale Crystal Slices

26.09.2016 | Materials Sciences

Lowering the Heat Makes New Materials Possible While Saving Energy

26.09.2016 | Materials Sciences

VideoLinks
B2B-VideoLinks
More VideoLinks >>>