Forum for Science, Industry and Business

Sponsored by:     3M 
Search our Site:

 

Common crop pesticides kill honeybee larvae in the hive

28.01.2014
Four pesticides commonly used on crops to kill insects and fungi also kill honeybee larvae within their hives, according to Penn State and University of Florida researchers.

The team also found that N-methyl-2-pyrrolidone (NMP) -- an inert, or inactive, chemical commonly used as a pesticide additive -- is highly toxic to honeybee larvae.


This shows bee larvae in cells with and without wax capsules.

Credit: Penn State

"We found that four of the pesticides most commonly found in beehives kill bee larvae," said Jim Frazier, professor of entomology, Penn State. "We also found that the negative effects of these pesticides are sometimes greater when the pesticides occur in combinations within the hive. Since pesticide safety is judged almost entirely on adult honeybee sensitivity to individual pesticides and also does not consider mixtures of pesticides, the risk assessment process that the Environmental Protection Agency uses should be changed."

According to Frazier, the team's previous research demonstrated that forager bees bring back to the hive an average of six different pesticides on the pollen they collect. Nurse bees use this pollen to make beebread, which they then feed to honeybee larvae. To examine the effects of four common pesticides -- fluvalinate, coumaphos, chlorothalonil and chlorpyrifos -- on bee larvae, the researchers reared honeybee larvae in their laboratory. They then applied the pesticides alone and in all combinations to the beebread to determine whether these insecticides and fungicides act alone or in concert to create a toxic environment for honeybee growth and development.

The researchers also investigated the effects of NMP on honeybee larvae by adding seven concentrations of the chemical to a pollen-derived, royal jelly diet. NMP is used to dissolve pesticides into formulations that then allow the active ingredients to spread and penetrate the plant or animal surfaces onto which they are applied. The team fed their treated diet, containing various types and concentrations of chemicals, to the laboratory-raised bee larvae.

The team's results are reported in the current issue of PLoS ONE.

"We found that mixtures of pesticides can have greater consequences for larval toxicity than one would expect from individual pesticides," Frazier said.

Among the four pesticides, honeybee larvae were most sensitive to chlorothalonil. They also were negatively affected by a mixture of chlorothalonil with fluvalinate. In addition, the larvae were sensitive to the combination of chlorothalonil with the miticide coumaphos. In contrast, the addition of coumaphos significantly reduced the toxicity of the fluvalinate and chlorothalonil mixture.

According to Chris Mullin, professor of entomology, Penn State, these pesticides may directly poison honeybee larvae or they may indirectly kill them by disrupting the beneficial fungi that are essential for nurse bees to process pollen into beebread.

"Chronic exposure to pesticides during the early life stage of honeybees may contribute to their inadequate nutrition or direct poisoning with a resulting impact on the survival and development of the entire bee brood," he said. The researchers note that fluvalinate and coumaphos are commonly used by beekeepers on crops to control Varroa mites, and are found to persist within beehives for about five years. Chlorothalonil is a broad-spectrum agricultural fungicide that is often applied to crops in bloom when honeybees are present for pollination because it is currently deemed safe to bees. Chlorpyrifos is a widely used organophosphate in crop management.

"Our findings suggest that the common pesticides chlorothalonil, fluvalinate, coumaphos and chloropyrifos, individually or in mixtures, have statistically significant impacts on honeybee larval survivorship," Mullin said. "This is the first study to report serious toxic effects on developing honeybee larvae of dietary pesticides at concentrations that currently occur in hives." The team also found that increasing amounts of NMP corresponded to increased larval mortality, even at the lowest concentration tested.

"There is a growing body of research that has reported a wide range of adverse effects of inactive ingredients to human health, including enhancing pesticide toxicities across the nervous, cardiovascular, respiratory and hormone systems," Mullin said. "The bulk of synthetic organic chemicals used and released into U.S. environments are formulation ingredients like NMP, which are generally recognized as safe. They have no mandated limits on their use and their residues remain unmonitored.

"Multi-billion pounds of these inactive ingredients overwhelm the total chemical burden from the active pesticide, drug and personal-care ingredients with which they are formulated. Among these co-formulants are surfactants and solvents of known high toxicity to fish, amphibians, honey bees and other non-target organisms. While we have found that NMP contributes to honeybee larvae mortality, the overall role of these inactive ingredients in pollinator decline remains to be determined."

Other authors on the paper include Wanyi Zhu, graduate research assistant in entomology, Penn State, and Daniel Schmehl, postdoctoral associate in entomology and nematology, University of Florida.

The National Honey Board, the U.S. Department of Agriculture-National Institute of Food and Agriculture-Agriculture and Food Research Initiative-Coordinated Agricultural Projects and the Foundational Award programs funded this research.

Sara LaJeunesse | EurekAlert!
Further information:
http://www.psu.edu

Further reports about: Food Chain Plus bee larvae crop pesticides honey bee honeybee larvae

More articles from Agricultural and Forestry Science:

nachricht Farming with forests
23.09.2016 | University of Illinois College of Agricultural, Consumer and Environmental Sciences (ACES)

nachricht Ecological intensification of agriculture
09.09.2016 | Julius-Maximilians-Universität Würzburg

All articles from Agricultural and Forestry Science >>>

The most recent press releases about innovation >>>

Die letzten 5 Focus-News des innovations-reports im Überblick:

Im Focus: OLED microdisplays in data glasses for improved human-machine interaction

The Fraunhofer Institute for Organic Electronics, Electron Beam and Plasma Technology FEP has been developing various applications for OLED microdisplays based on organic semiconductors. By integrating the capabilities of an image sensor directly into the microdisplay, eye movements can be recorded by the smart glasses and utilized for guidance and control functions, as one example. The new design will be debuted at Augmented World Expo Europe (AWE) in Berlin at Booth B25, October 18th – 19th.

“Augmented-reality” and “wearables” have become terms we encounter almost daily. Both can make daily life a little simpler and provide valuable assistance for...

Im Focus: Artificial Intelligence Helps in the Discovery of New Materials

With the help of artificial intelligence, chemists from the University of Basel in Switzerland have computed the characteristics of about two million crystals made up of four chemical elements. The researchers were able to identify 90 previously unknown thermodynamically stable crystals that can be regarded as new materials. They report on their findings in the scientific journal Physical Review Letters.

Elpasolite is a glassy, transparent, shiny and soft mineral with a cubic crystal structure. First discovered in El Paso County (Colorado, USA), it can also be...

Im Focus: Complex hardmetal tools out of the 3D printer

For the first time, Fraunhofer IKTS shows additively manufactured hardmetal tools at WorldPM 2016 in Hamburg. Mechanical, chemical as well as a high heat resistance and extreme hardness are required from tools that are used in mechanical and automotive engineering or in plastics and building materials industry. Researchers at the Fraunhofer Institute for Ceramic Technologies and Systems IKTS in Dresden managed the production of complex hardmetal tools via 3D printing in a quality that are in no way inferior to conventionally produced high-performance tools.

Fraunhofer IKTS counts decades of proven expertise in the development of hardmetals. To date, reliable cutting, drilling, pressing and stamping tools made of...

Im Focus: Launch of New Industry Working Group for Process Control in Laser Material Processing

At AKL’16, the International Laser Technology Congress held in May this year, interest in the topic of process control was greater than expected. Appropriately, the event was also used to launch the Industry Working Group for Process Control in Laser Material Processing. The group provides a forum for representatives from industry and research to initiate pre-competitive projects and discuss issues such as standards, potential cost savings and feasibility.

In the age of industry 4.0, laser technology is firmly established within manufacturing. A wide variety of laser techniques – from USP ablation and additive...

Im Focus: New laser joining technologies at ‘K 2016’ trade fair

Every three years, the plastics industry gathers at K, the international trade fair for plastics and rubber in Düsseldorf. The Fraunhofer Institute for Laser Technology ILT will also be attending again and presenting many innovative technologies, such as for joining plastics and metals using ultrashort pulse lasers. From October 19 to 26, you can find the Fraunhofer ILT at the joint Fraunhofer booth SC01 in Hall 7.

K is the world’s largest trade fair for the plastics and rubber industry. As in previous years, the organizers are expecting 3,000 exhibitors and more than...

All Focus news of the innovation-report >>>

Anzeige

Anzeige

Event News

Experts from industry and academia discuss the future mobile telecommunications standard 5G

23.09.2016 | Event News

ICPE in Graz for the seventh time

20.09.2016 | Event News

Using mathematical models to understand our brain

16.09.2016 | Event News

 
Latest News

Chains of nanogold – forged with atomic precision

23.09.2016 | Life Sciences

New leukemia treatment offers hope

23.09.2016 | Health and Medicine

Self-assembled nanostructures hit their target

23.09.2016 | Life Sciences

VideoLinks
B2B-VideoLinks
More VideoLinks >>>